Rear water supply and fixed shower head - Satin grey finish

English
Reference
88402
Specifications

<ul><li>1 to 5 bars</li></ul>

<ul><li>6 l/min using a built-in flow regulator
- Flow regulation using a threaded ring
- Anti water-hammer device
- Fixed directional shower head with anti limescale spikes</li></ul>

<ul><li>30 seconds (-10/+5 seconds)</li></ul>

<ul><li>G 1/2'' (15x21) from the top
- On single P 50 NF II tap with cold or pre-mixed water</li></ul>

<ul><li>RAL 7035 satin grey finish painted components
- 3.3 mm aluminium profile
- High-resistance ABS RAL 7031 end caps</li></ul>

<ul><li>This tap can withstand a thermal shock of 75°C for 30 minutes as part of a thermal shock programme</li></ul>

<ul><li>Non-turnable push button to avoid premature wear
- Non-removable and wear-proof red marker</li></ul>

<ul><li>1/2" (15x21) hose with swivel nut
- MM 1/2" (15x21) stop valve and 250 micron filters
- Masking patch if soap-holder not used
- Fixture screws and Installation instructions</li></ul>

<ul><li>Brass compliant with standards NF EN1982 / NF EN12164 / NF EN12165
- Nickel-Chrome surface treatment compliant with NF EN12540
- Neutral Salt Spray (NSS) resistant: 300 h according to NF ISO 9227</li></ul>

Appel d'offres

#N/A

Specifications Title

Recommended working pressure:

Flow:

Flow time:

Hydraulic supply:

Material:

Thermal resistance:

Safety:

Delivered with:

Standards / Approvals:

Top
of page