Extra-flat detection and long spout ref 30616 - For 10 to 50 mm thick partitions


<ul><li>For washbasins: in service duct area (10 to 50 mm thick partitions)</li></ul>

<ul><li>1 to 5 bars</li></ul>

<ul><li>10 l/min flow limiter
- Anti water-hammer system</li></ul>

<ul><li>Adjustable from 1 to 30 seconds</li></ul>

<ul><li>Adjustable from 100 to 700 mm - Preset to 200 mm</li></ul>

<ul><li>On G 3/4" (20x27) solenoid, cold or pre-mixed water</li></ul>

<ul><li>230 Volt / 12Volt - 6VA transformer built into the box</li></ul>

<ul><li>Withstands thermal shocks of 75°C for 30 minutes as part of a thermal shock programme</li></ul>

<ul><li>1 IP65 detection cell for 50 to 200 mm thick partitions delivered with 2 m of cable
- 1 G 1/2" (15x21) long, non water retaining spout for partitions from 1 to 200 mm thick
- 1 3/4" (20x27) solenoid
- 1 stop valve
- IP65 Electronic box</li></ul>

<ul><li>Nickel-chrome surface treatment compliant with NF EN12540
- Neutral salt spray (NSS) resistant: 200 hours according to NF ISO 9227
- Safety transformer compliant with standard EN 60 742</li></ul>

Appel d'offres

PRESTO brand optoelectronic detection system for service duct installation ref.52470 including a 230/12V safety transformer, a long spout, a solenoid, a wall-mounted sensor removable from the rear for 10 to 50 mm thick partitions (or validated equivalent)

Specifications Title


Recommended working pressure:


Flow time:


Hydraulic supply:

Electricity supply:

Thermal resistance:

Delivered with:

Standards / Approvals:

of page