230 V AC/7 VDC IP65 transformer - PEX hoses


<ul><li>This electronic sensor Start / Stop washbasin single block mixer tap activates and stops the flow of water by detecting the user's hands near the sensor. Fitted with PEX hoses it is especially recommended for hospitals, medical sites, etc.</li></ul>

<ul><li>1 to 5 bars</li></ul>

<ul><li>8 l/min using a built-in flow limiter
- laminar flow straightener
- Anti water-hammer system</li></ul>

<ul><li>30 seconds
- Start/Stop by presenting the hand in front of the sensor</li></ul>

<ul><li>G 3/8'' (12x17)</li></ul>

<ul><li>230 / 7 Volt transformer in a remote watertight IP65 case</li></ul>

<ul><li>Chrome plated brass body
- High chrome plated fixed spout</li></ul>

<ul><li>Withstands thermal shocks of 75°C for 30 minutes as part of a thermal shock programme</li></ul>

<ul><li>Anti-scalding: adjustable maximum temperature limiter
- Automatic solenoid shut-off if the water flows > 30 seconds or if the sensor is deteriorated
- Automatic 30 second flow 72 hours after the last use</li></ul>

<ul><li>1 Clamping nut
- 1 Gasket and washer
- 2 PEX hoses with female 3/8" nut (12x17) with NF check valves
- 2 Filter stop valves and wall plates for exposed angle installation
- 1 Self-adhesive sticker</li></ul>

<ul><li>The brass used complies with standards NF EN1982, EN12164, EN12165
- 200h neutral salt spray resistant (NSS) in compliance with standard NF ISO 9227.</li></ul>

Appel d'offres

PRESTO brand START / STOP electronic deck-mounted washbasin mixer tap with temperature limiter ref.55139 including swivel spout, 230 / 7 V transformer and PEX hoses (or validated equivalent)

Specifications Title


Recommended working pressure:


Flow time:

Hydraulic supply:

Electricity supply:

Material and colour finish:

Thermal resistance:


Delivered with:

Standards / Approvals:

of page