12 V AC transformer power supply not included - Satin grey finish


<ul><li>The single electronic wall-mounted exposed washbasin tap activates the water flow whenever hands are detected under the tap and automatically shuts off the flow when they are removed.</li></ul>

<ul><li>1 to 5 bars</li></ul>

<ul><li>3 l/min using a built-in flow limiter
- High quality anti-limescale aerator
- Anti water-hammer effect system</li></ul>

<ul><li>Male G 1/2" (15x21) cold, hot or pre-mixed water</li></ul>

<ul><li>6V 2CR5 type lithium battery in a housing built into the tap body</li></ul>

<ul><li>Injected moulded metal cover with satin grey finish
- Short brass spout with nickel-chrome surface treatment</li></ul>

<ul><li>Withstands thermal shocks of 75°C for 30 minutes as part of a thermal shock programme</li></ul>

<ul><li>Automatic shut-off if the water flows > 30 seconds, if the battery is run down, or if the sensor is deteriorated
- Automatic 30 second duty flush 24 hours after the last use</li></ul>

<ul><li>Washers and assembly key
- Fixture anchors and screws
- 1 stop valve with built-in filter
- 1 Self-adhesive sticker and 1 reflector for programming</li></ul>

<ul><li>Nickel-chrome surface treatment compliant with NF EN12540
- Neutral salt spray (NSS) resistant: 200 hours according to NF ISO 9227
- Brass body and components compliant with NF EN1982 / NF EN12164 / NF EN12165</li></ul>

Appel d'offres

PRESTO brand self adaptive mono-block wall-mounted exposed electronic tap ref. 55231 for 230/12 volt power supply. A reflector is used to modify the programmes and adapt the timer, stop the flow to clean the basin or trigger a 30 minute rinse against legionellosis. For pre-mixed or cold water. Velvet chrome-plated finish with short spout. Exposed installation. CE Approved. ISO 9001 certified company.

Specifications Title


Recommended working pressure:


Hydraulic supply:

Electricity supply:

Material and colour finish:

Thermal resistance:


Delivered with:

Standards / Approvals:

of page